Epoxy Resin and Hardener

Individual Packaging

Ph. 561-588-1001

Resins
Polyester Resins
Epoxy Resins
Polyester Gelcoats
Colored Pigments
Polyester Products
Ortho
Isophthalic
Vinyl Ester
Laminating Epoxy
Klear Cote
West System
White
Tooling Gelcoat
Clear
Translucent
Solid Colors
Duratec
Glazing Putties
Primers
Liquid Urethane Expanding Foam
Pourable Foam in 2LB, 4LB, 8LB and 16LB densities.


Epoxy Information (FAQ) (Answers to some of the most frequently asked questions)



Individual Packaging of our
635 and 150 Epoxy Resin Systems.

For customers that need to buy just resin or just hardener.

Please note, for best pricing we recommend buying our epoxy system in KIT form. Click Here: Epoxy Kit Pricing

635 THIN EPOXY RESIN
Use this chart to purchase the 635 Resin by itself.
For best pricing we recommend buying epoxy in KIT form:
Kit Pricing
Cat No.
Resin Amount
Price for Resin Only
EPOX-635T016
Pint
$10.85
EPOX-635T032
Quart
$18.20
EPOX-635T064
1/2 Gallon
$29.75
EPOX-635T128
Gallon
$50.75 / Gal
2 to 4 Gallons
$48.75 / Gal
5 or more Gallons
$44.75 / Gal


2:1 Ratio Slow Epoxy Hardener (#556)
NOTE: Our slow hardener should only be used at temperatures above 80degrees unless an extremely long curing time is desired. Temperatures below 70F during the cure can result in a 2-3 day drying time.
Use this chart to purchase the 2:1 SLOW Hardener by itself.
For best pricing we recommend buying epoxy in KIT form:
Kit Pricing
Cat No.
Hardener Amount
Price for Hardener Only
EPOX-556H008
8oz
$6.70
EPOX-556H016
Pint
$11.35
EPOX-556H032
Quart
$18.65
EPOX-556H064
1/2 Gallon
$30.25
EPOX-556H128
Gallon
$51.75 / Gal


3:1 Ratio Medium Epoxy Hardener

Use this chart to purchase the 3:1 Medium Hardener by itself.
For best pricing we recommend buying epoxy in KIT form:
Kit Pricing
Cat No.
Hardener Amount
Price for Hardener Only
EPOX-31H008
5.3oz
$5.15
EPOX-31H016
10.6oz
$7.80
EPOX-31H032
21.3oz
$13.10
EPOX-31H064
42.6oz (1/3rd Gallon)
$20.95
EPOX-31H085
85oz (2/3rds Gallon)
$36.25
EPOX-31H128
Gallon
$51.75 / Gal


4:1 Ratio Fast Epoxy Hardener

Use this chart to purchase the 4:1 FAST Hardener by itself.
For best pricing we recommend buying epoxy in KIT form:
Kit Pricing
Cat No.
Hardener Amount
Price for Hardener Only
EPOX-41H008
8oz
$6.70
EPOX-41H016
Pint
$11.35
EPOX-41H032
Quart
$18.65
EPOX-41H064
1/2 Gallon
$30.25
EPOX-41H128
Gallon
$51.75 / Gal

Epoxy Information (FAQ) (Answers to some of the most frequently asked questions)

150 THICK EPOXY RESIN
(Not for fiberglass wet-out)
Use this chart to purchase the 150 THICK Resin by itself.
For best pricing we recommend buying epoxy in KIT form:
Kit Pricing
Cat No.
Resin Amount
Price for Resin Only
EPOX-150T016
Pint
$10.85
EPOX-150T032
Quart
$18.20
EPOX-150T064
1/2 Gallon
$29.75
EPOX-150T128
Gallon
$50.75 / Gal
2 to 4 Gallons
$48.75 / Gal
5 or more Gallons
$44.75 / Gal



Description of Epoxy Hardeners
All working times(pot life) are based upon an optimum working temperature of about 80 degrees F. Temperatures variations will greatly affect curing times, and when below 65F can sometimes double curing times. Other factors that affect epoxy curing can be moisture and humidity, as well as the thickness of lamination.
Description of Times Shown
  • Pot Life: Represents the maximum amount of time that the mixture can remain in your pot. Once applied to your working surface(usually in thin layers) this will greatly increase the time you have before the epoxy sets.
  • Set Time: This is the amount of time after the epoxy is applied in a thin film that it will arrive at a gel state, still wet, but no longer a liquid. To recoat without sanding between coats you must reapply after this point but before the drying time has completed.
  • Drying Time: At this point the epoxy will be ready to sand and has reached about 90% of its cured hardness. Epoxy still might remain a bit flexible at this point but will complete 100% curing over the following 1-5 days. If air temperature get below 60 degrees, dry times can double from the times shown.
1 to 1 Epoxy Hardener for Laminating and Coating
For Use With Only 150 Thick Epoxy Resin

 

  • Mixing Ratio by Volume: 1:1
  • Pot Life: 30-35 Min @ 80F
  • Set Time: 3-4 Hours
  • Drying Time: 12-14 Hours

Generally used in combination with our thick resin for an excellent coating epoxy.

2 to 1 SLOW Epoxy Hardener (#556)
Using this hardener provides for maximum working time at high temperatures. Ideal in high humidity conditions and temperatures over 85F.
Should not be used in conditions below 70F unless an extremely lengthy curing time is desired.
 
  • Mixing Ratio by Volume: 2:1
  • Pot Life: 35-40 Min @ 80F
  • Set Time: 5-6 Hours
  • Drying Time: 24-28 Hours
Slow
NON-Blushing
3 to 1 MEDIUM Epoxy Hardener
Our most popular hardener choice, an excellent general purpose hardener for most conditions including high performance applications. Great for fiberglass and composite layup with carbon or kevlar.

 

  • Mixing Ratio by Volume: 3:1
  • Pot Life: 20-25 Min @ 80F
  • Set Time: 3-4 Hours
  • Drying Time: 8-10 Hours
Medium
4 to 1 FAST Epoxy Hardener
Our fast epoxy hardener is great for cold weather conditions or for those who prefer fast curing times at normal temperatures. It is good for fiberglass and composite layup as well as a fast cure bonding applications.

The faster cure of this particular hardener will also result in a more rigid laminate.

 
  • Mixing Ratio by Volume: 4:1
  • Pot Life: 15 Min @ 80F
  • Set Time: 1-2 Hours
  • Drying Time: 3-4 Hours
Fast